Menu
Menu
ERT interfaces provide an easy and convenient control and diagnose of all the automated solutions of both Arthur Holm and Albiral, helping to reduce the installation costs in terms of equipment and time.
Easy to install and set-up, they facilitate a quicker installation and eliminate the need of external relay boxes and extra power outlets. If required, it’s possible to have the factory’s virtual support on site as long as there is an Internet connection available.
AHlink wireless control (App) is also integrated in the ERT interfaces, providing an easy and direct access to the most common settings and to the AHnet and making the start-up and future interventions hassle free. This means there is no need to access physically the monitor or any automated product to set-up or diagnose its installation.
ERT interfaces provide an easy and convenient system to IP control and to diagnose motorized monitors, microphone lifts and other automated solutions by Arthur Holm or Albiral.
The ERT-60 integrates two AHnet ports (RS-422) to control up to sixty motorized units (ERT-30 with 1 AHnet port to control up to thirty units) with a USB service port interface for firmware upgrade. The One Touch Addressing System [OTAS] makes addressing Arthur Holm motorised products very straightforward. The first unit to be activated on the cover plate of the monitor after installation will have address 1, the next one will have address 2 and so on.
ERTs are also equipped with a service menu allowing to trouble shoot the installation and get essential information about the use of the device.
In combination with the AHlink, they provide total control of the Arthur Holm and Albiral motorized devices.
